| Clinton Electronics manufactures
a complete line of Grayscale Medical Displays
in both CRT and LCD technologies. In addition,
several Color LCD models are offered in open
frame or complete monitor configurations.
Clinton is also an authorized distributor
for Sharp® LCD monitors. The CRT line
of displays ranges from 2 mega-pixel to
5 mega-pixel in both Portrait and Landscape
formats. All displays feature digital controls,
Laminated Anti-Reflective coated panels,
different input options, and Dispenser Cathodes.
In addition, custom phosphor options are
also available on all display models. The
DS2000 and DS2100 series monitors offer
true Multi-Frequency operation in a variety
of analog sync signal inputs to match the
requirements of commercially available graphic
cards and custom medical graphic cards.
CRT types range from 20”-110o-29mm
to 21”-90o-36mm to meet the requirements
of performance verses cost considerations.
The DS5100P monitor represents the ultimate
in front of screen performance in a 5 mega-pixel
display. With its fully digital architecture,
the display is configured for 4 and 5 mega-pixel
resolutions at 50 and 75 ohms for full compatibility
with Dome® and Metheus/Barco® graphics
cards.
The Clinton line of Grayscale LCD monitors
is available in 2 mega-pixel and 3 mega-pixel
formats capable of running in either Portrait
or Landscape orientation. Standard features
on the DL Series II monitors include a built
in Luminance Stabilization Circuit, factory
calibrated Gamma Correction Curve, Protective
Contrast Panel, Built in Power Supply, Intelligent
LED, and USB ports. Coupled with the new
Matrox® MED 3mp-DVI graphics cards,
these displays feature precision reproduction
of the medical image and hardware pivot
for fast refresh in the portrait mode.
|
The
Clinton Electronics 20-inch Digital Series
(DS) monitor is a medium-resolution display
controlled by an embedded microprocessor and
custom ASIC. The unit is designed for use
as a 1000 line display for MRI, CT, and other
digital based modalities at high brightness.
Signal input is via 3 BNC connectors with
loop through (composite), combined or separate
sync capabilities. Multi-frequency scanning
from 31.5 to 105 kHz horizontal provides compatibility
with standard VGA to custom formats at flicker-free
vertical rates of 50 to 150 Hz. As a true
multi-sync monitor, the DS series can be used
with commercial desktop PC's and generic or
custom medical video cards. An Anti-Reflective
laminated panel and dispenser cathode are
standard.
The
Clinton Electronics 21-inch Digital series
(DS) monitor is a high-resolution display
controlled by an embedded microprocessor and
custom ASIC. The DS 2106P is optimized for
use as a 1600 line display for MRI, CT and
other digital based modalities at high brightness.
The six-grid electron optics is characterized
by smaller pixels which improves performance
into the corners. Multi-frequency scanning
from 31.5 to 125kHz horizontal provides compatibility
with standard VGA to custom format at flicker-free
vertical rates of 50 to 150Hz. Signal input
is via 3 BNC connectors. As a true multi-sync
monitor, the DS2106P series can be used with
commercial desktop PC's and generic or custom
medical video cards that support portrait
orientation. An Anti-Reflective laminated
panel and dispenser cathode are standard.
Color
Secondary Read/Playback
Color
Secondary Read/Playback
Medical Diagnostic Gray Scale